How To Clean Inlet Water Filter Ge Washer
16- ENG
A14687
three. Connect length of garden hose
to water inlet of pump.
4. Add
RV
antifreeze
or windshield
washer fluid to hose every bit shown.
five. Pull engine starter rope slowly
several times until antifreeze/
washer fluid comes out of high-
pressure hose con nec tion of
pump.
6. Remove garden hose from water
inlet of pump.
7. Reconnect spark plug wire.
HOW TO CLEAN THE WATER
INLET FILTER
This screen fi lter should exist checked
periodically and cleaned if necessary.
1. Remove
fi lter by
grasping stop
and removing
it from water
inlet of pump
every bit shown.
Filter Screen
STORAGE
ENGINE
Consult the Engine Owners
Manual for the man u fac tur er's
recommendations for storage.
PUMP
The manufacturer recommends using
a pump protector/winterizer, such as
DP80, when storing the unit of measurement for more
than 30 days and/or when freezing
temperatures are expected. If a pump
protector/winterizer is not bachelor, RV
antifreeze or windshield washer fluid
needs to exist run through the pump as
outlined in the steps below.
Annotation: Using a pump protector/
winterizer, RV antifreeze or windshield
washer fluid is to provide proper
lubrication to the internal seals of the
pump regardless of temperature or
environs.
1. Obtain a funnel, vi oz. of RV
antifreeze or windshield washer
fluid, and sixteen–36" of garden hose
with a male hose connector
fastened to one end.
Take a chance of property
damage. Employ simply
RV antifreeze. Any other an ti freeze
is corrosive and can damage pump.
2.
Disconnect spark plug wire.
two. Clean
fi lter by fl ushing it with
h2o on both sides.
3. Re-insert
fi lter into water inlet of
pump. NOTE: Cone side faces out.
NOTE: Do non operate pressure
washer without fi lter properly installed.
Source: https://www.manualsdir.com/manuals/81356/excell-precision-xr2625.html?page=16
Posted by: cressxviver.blogspot.com
0 Response to "How To Clean Inlet Water Filter Ge Washer"
Post a Comment