How To Clean Coretec Plus Vinyl Plank Flooring

CoreTec floors are beautiful and easy to maintain vinyl planks with all the aesthetic qualities of hardwood floors. CoreTec materials are easy to install but require a certain amount of maintenance of their surface.
The proper cleaning practice of CoreTec takes a few simple care steps. Keep the floor in your room looking beautiful for years with this most affordable type of vinyl plank flooring. Continue reading to get to know a few hints on how to make your flooring last in good shape for long.
Learn which cleaning products to use, why you should avoid the direct light on your flooring, how to avoid dust related scratches and whether to use warm water, vinegar, or soap for cleaning. What about vacuum, broom, and mop? Ensure to adopt some new daily routines to keep your CoreTec floors always looking new. Follow our guidelines on how to clean CoreTec flooring.

CoreTec flooring—introduction

What's the best way to provide your home with a high-end look on a budget?

There's nothing like CoreTec floors.

CoreTec flooring is highly durable and waterproof luxury vinyl flooring planks and tiles.

These floors combine:

the advantages of vinyl flooring with
the great looks of hardwood flooring;

Isn't it precisely what we're looking for?

Maintenance tips

CoreTec vinyl flooring products come as planks with beveled edges. This quality makes them look like hardwood floors.

The vinyl qualities of the CoreTec floor make it easy to maintain using various cleaning methods.

Installing CoreTec flooring is simple. You can reach out for professional flooring services or install CoreTec floors by yourself.

CoreTec floor is DIY-friendly and easy to handle.

The popular angle tap locking system allows for low-prep and simple installation over most existing floors.

An abundance of how-to tutorials, videos, and blogs available online will guide you through the CoreTec floor installation process.

Check the House Rituals website also for many other household-related tips, reviews, posts, and comment.

When it comes to maintenance and cleaning of flooring CoreTec, we should keep a couple of golden rules in mind.

Let's look at them in the following paragraph.

Protective mats

What's one of the primary ways to protect CoreTec flooring?

It's a good idea to place protective mats outside of all entrances and exits.

They will absorb soil and moisture and trap excessive:

dirt,
sand,
grit,
oil,
asphalt,
driveway sealer, and
any other residue,

that you would otherwise track inside.

We'll get to ways to clean CoreTec later, but not letting it get dirty comes first.

Tip: Use 100% latex-backed mats. Don't use mats with a rubber backing as it could cause the flooring to discolor.

Furniture and mechanical damage

Let's say you've just installed CoreTec flooring in the main room of your apartment.

Don't put any furnishing on the floor until the grout and adhesive have had enough time to dry.

1. Grouted vinyl floors need 48 hours,

2. All other vinyl floors need at least 24 hours.

Then, be careful when moving heavy appliances on CoreTec floors.

CoreTec flooring is durable, but you should pay attention to prevent the floor from heavy mechanical damage or tearing.

Tip: To move bigger pieces, take strips of hardboard panels or plywood, lay them on the floor, and place the piece of furniture or appliance on them. Slide, roll or walk it across the boards.

Also, mind what shoes you wear when you walk on your CoreTec flooring. Avoid:

stiletto-style heels,
cleats, or
spiked golf shoes;

These shoes may cause scratches and indentations on your luxury vinyl flooring.

Heavy and rarely moved pieces of furniture should have on their legs a caster, a cup, or a large, flat, non-staining surface floor protector—with flat, smooth glides with self-adhesive felt pads.

Avoid using dome-shaped, minor, or narrow metal glides.

Check them regularly for wear and dirt and replace them when needed.

Mobile appliances and furniture should have casters with a diameter of 2" and ¾" hard rubber non-staining treads that swivel effortlessly.

Keep your floor away from heat dangers as they can burn, fade or discolor your floor.

Steer clear of the direct contact of your CoreTec flooring with:

refrigerators,
ranges, and
other heat-producing appliances, or hot air registers that produce heat over 120°F;

Sunlight

Keep in mind that Coretec Flooring requires sunlight protection.

Materials that these durable CoreTec floors are made of can fade or get discolored if overexposed to the sun's intense light.

Ensure to keep window coverings closed during the heaviest light times of the day.

Cleaning surface

Use suitable cleaning agents and equipment to sweep, wipe, mop, and polish your CoreTec floors.

The wear layer material of CoreTec flooring is up to 20 mm thick, so it really can stand the test of time if well cared for.

All you have to do is provide the proper care to your vinyl floors.

Equip yourself with a couple of cleaning products, vacuum, soap, and mops, and let's have a look at a cleaning menu!

For routine cleaning, you should:

dust,
sweep, or
vacuum

the floor regularly.

It's crucial to clean vinyl planks regularly to prevent any buildup of dirt or gritty substances. These substances could scratch or dull the floor, especially in the long run.

Vacuum cleaner

If you use a vacuum cleaner, avoid using a beater brush—it could damage the floor.

Sweeping

Sweeping, as unimportant as it sounds, may actually be one of the essential points to keep CoreTec flooring clean.

Remember sweeping your CoreTec flooring with a broom regularly to keep it tidy and clean.

Stains

In case of any spills, react immediately. Clean them with a damp mop or cloth.

If you leave a spill for too long, it's going to soak into the flooring or get between the cracks in the planks. Likewise, if you scrub the liquid, it will rub it further into the flooring.

Use a cloth or paper towel to soak up the liquid with a blotting motion.

You can use warm water and a light detergent (i.e., dish soap) to remove stains from juice or another sticky residue.

Always rinse with clean water afterward to remove any soap residue.

Avoid:

abrasive cleaners,
strong detergents, or
spray cleaners

since they commonly leave a dull residue behind.

To handle a problematic spill or stain, you can use rubbing alcohol.

Mopping

You should also mop the floor.

Feel free to run a dry mop over your CoreTec flooring.

It will collect all the dust, dirt, and grit your broom didn't handle before.

It's a way to get to hard-to-reach areas such as corners and under the furniture.

Choose a non abrasive, microfiber mop for vinyl floors.

Abrasive mops or treated dust mops could damage your flooring, enhancing tiny scratches to appear with time.

Wet cleaning

CoreTec floor is water, mold, and mildew resistant.

It means that you can use wet cleaning methods.

Go for a non abrasive mop—it's confirmed to be the best method for taking good care of a vinyl plank.

Important: Don't use a steam mop on your vinyl flooring. Slits between the vinyl planks make them vulnerable to heat and moisture. A steam mop may cause damage to the floors by loosening the glue between the layers of the flooring.

Always use a pH neutral cleaner diluted in cool water.

There are also spray cleaners designed not to leave any residue after cleaning.

Learn how to clean CoreTec flooring properly by experimenting with various PH neutral cleaner types; some cleaning products brands use the associates program.

CoreTec recommends Encore floor cleaner:

it's pH neutral,
it removes dirt, grease, and scuffs,
it leaves your floor sparkling clean (with no need to rinse);

Encore works perfectly for hard floorings such as

hardwood,
ceramic,
laminate, and
resilient flooring;

Occasionally, you should clean the floor with a resilient floor cleaner.

Vinegar

Apple cider vinegar is among the most potent cleaning agents for keeping your CoreTec floors fresh.

Take a gallon of water and pour a cup of apple cider vinegar inside.

Wipe over the flooring to remove all the dirt, leaving no residues or traces with a damp mop.

Tip: Don't worry about the smell. It will naturally disappear as soon as the flooring gets dry. You can also mix your solution with a pinch of jojoba oil to neutralize the smell.

Apple cider vinegar is perfect:

strong enough to clean, and
mild enough not to cause any damage to the floors.

Baking soda

If some significant portions of your vinyl flooring are covered in stains, go for baking soda.

Mix it in some water to create a paste and apply it with a soft cloth.

Polishing

Cleaning practice is crucial, but you need to indulge in another vital routine to keep your room truly splendid.

While cleaning the floors makes them look good, polishing takes them a level higher.

Unfortunately, vinyl floors lose their natural luster and shine with time.

To prevent this, especially if your place is high-trafficked regularly, regularly apply a quality floor polish.

Go for a product designed specifically for vinyl flooring to ensure protection from any potential wear and tear.

How Much To Replumb a House
How to Speed Up Mattress Off Gassing
How to Wash Owlet Sock
How Much Does Lowes Charge To Install a Water Heater
How Much to Recarpet a House